actuating system
英 [ˈæktʃueɪtɪŋ ˈsɪstəm]
美 [ˈæktʃueɪtɪŋ ˈsɪstəm]
致动系统
双语例句
- It's not our business.
这不关我们的事。 - Stably controlled auto-ignition combustion ( CAI) in gasoline engine can be achieved by trapping the hot burnt gases in the cylinder with variable valve actuating system.
利用可变气门机构可以将燃烧废气保留在缸内，从而实现稳定的汽油机可控自燃燃烧。 - The this aircraft appliance has the independence actuating unit and the electrical system, and uses the button common control.
本机器具有独立的动力机构和电气系统，并采用按钮集中控制。 - A servomotor is arranged at the end of each oil distributing module and serves as an actuating device of the hydraulic system.
在每个配油模块末端分别设有一个接力器，作为液压系统的执行装置。 - The actuating hydraulic system is bled by pumping the pedal.
通过泵压踏板来对操作液压系统进行放气。 - MMM Flexibly Regulated Electric Actuating System
MMM柔性调节式电动作动系统 - In case of longer distance between servo-controlled field and servo-controlling station ( computer), the effect of the small analog signals outputted from the measuring components of servocontrolled field actuating mechanism on the system accuracy after long distance transmission is analyzed.
分析伺服控制现场与伺服控制台（计算机）之间距离较远情况下伺服控制现场执行机构中测量元件输出的小模拟信号经长线传输后对系统精度的影响。 - Dynamic model test of overflow dam section of Three Gorges Project was carried out on a large-scale vibration actuating system.
利用大型三向六自由度地震模拟振动台，对我国三峡工程溢流坝段进行了动力模型试验。 - Simulation of Dynamic Characteristics of Air Brake Actuating System in Motor Vehicles
汽车气压制动传动系统动特性的仿真研究 - Dynamic characteristics of air brake actuating system for motor vehicles are analysed in this paper, the significance and necessity for setting up a dynamic mathematic model are argued.
对汽车气制动传动系统进行了动态特性分析。论述了求取动态数学模型的意义和必要性； - The results of simulating calculations basically agree with that of bench tests under the same conditions, it is proved that the simulating model is valid for expressing the air brake actuating system.
在相同条件下，仿真计算结果与台架试验结果基本一致，表明仿真模型能够正确描述该气压制动传动系统。 - The spring brake air chamber of motor vehicle, acting as the power installation of brake actuating system, improves the efficacy and simplifies the construction of parking brake system.
汽车储能弹簧制动气室做为驻车制动系统的动力装置，提高了驻车制动效能，简化了驻车制动系统结构。 - The authors discuss various impacts on the military hospitals after entering WTO, and put forward measures as: ① building the actuating system to culture the talents team;
本文论述了加入WTO后军队医院面临的种种冲击，并提出了相应的对策。1建立激励机制，培养人才梯队； - This article brings forward a design of embedded motion control system based on hardware platform of ARM and FPGA. ARM fulfills application management, while FPGA executes interpolation operation and emits outbursts to servo actuating system to control servo-actuators working with movement instruction.
本文是在基于ARM+FPGA的硬件平台上进行嵌入式运动控制系统的设计，ARM实现应用管理，FPGA实现插补运算，发出脉冲到伺服驱动系统，形成运动指令控制伺服电机运转等。 - The back section mechanical system ( from the input of the reversible hydraulic servo actuating system to the rudder) is linearized, and the order is reduced to the fourth-order and the first-order.
对从可逆式液压助力器到舵面的后段部分进行线性化和降阶处理，分别建立了助力器的四阶和一阶线性等效模型。 - Here such a flexible electric actuating system ( MMM) has been include its combination, principle, characteristic and prospective application.
本文阐述了此三种元件均能调节的MMM柔性调节电动作动系统的构成、原理、特点及应用前景。 - Meanwhile methods, procedures and application prospects in setting up the dynamic mathematic model and performing the dynamic analysis for the actuating system are discussed.
给出了求取气制动传动系统动态数学模型并进行动态分析的方法、步骤及应用前景。 - To improve reliability of the digital direct drive servo actuating system, the system was configured redundantly with the electrical components of three redundancies and the mechanical components of two redundancies. Redundancy configuration and management scheme of the redundant servo actuating system were designed.
为了提高数字式直接驱动伺服作动系统的可靠性，对系统进行了余度配置，电气部分采取三余度，机械部分采取二余度，设计了伺服作动系统的余度配置和管理方案。 - In this paper a new time cutting circular interpolation method was provided which was verified by examples. The new calculating method was simple, it had high interpolation accuracy, quick executing speed and could be applied conveniently to two coordinates and two actuating CNC system.
本文提出一种新的时间分割圆弧插补算法，作了证明，并通过实例进行验证，该算法简单、插补精度高、执行速度快，可以方便地应用于两坐标两联动CNC系统。 - Experimental Investigation of Dynamic Characteristics of Automotive Air Brake Actuating System
汽车气制动传动系统动态特性的试验研究 - The tilting train and its actuating system and control
摆式高速列车及其倾摆动力与控制 - Effect of the non-linearity of actuating system and tyre characteristics to control accuracy and robustness of the control system are analyzed and investigated. Computing analogue of several typical ABS working modes are made and the analogue result analyzed and evaluated.
分析研究了作动系统及轮胎特性的非线性对控制系统鲁棒性及控制精度的影响，计算模拟了几种典型的ABS工况，并对模拟结果作了分析与评价。 - Based on frequency analysis, the design principles of the actuating system are advanced to ensure system stability and velocity.
对系统进行了频率特性分析，在此基础上，提出了保证车体倾摆稳定性和快速性的动力系统设计原则。 - Study to the Forced Actuating Bus Intelligent Temperature-Measuring System Used for the Construction on Congelation
冻结施工中强力驱动型总线式智能测温系统的研究 - The Actuating System Analytical of the Electric Submersible Progressive Cavity Pump
电潜螺杆泵驱动系统分析研究 - Finally take the relay valve for example, time lag characteristic of air brake actuating system is discussed and the spectrum analysis is introduced into the investigation and assessment of dynamic characteristics for air brake actuating system.
以继动阀为例，探讨了气制动传动系统滞后反应时间特性，并将频谱分析引入到对气制动传动系统动态特性的分析与评价中。 - On this basis, pneumatic manipulator was used for the realization of the action of transforming the parts for pressing machines. Then actuating mechanism and driving system was designed and optimized.
在此基础上，选择气动机械手实现冲压移料的动作，并对机械手的执行机构和驱动系统进行设计和适当的优化。 - An automatic computer-vision based system for the precise measurement of the injector base inner dimension is designed and built. The relevant designs of computer-vision system, software system, controlling and actuating system are completed.
本文研究的主要内容有：1.基于视觉测量技术建立了喷油器底座内尺寸自动检测系统，完成了视觉系统、软件系统和控制执行系统的软硬件设计。 - Hydraulic valves are the core control components in hydraulic system, its perfor-mance will impact on the static and dynamic characteristics of actuating elements and hydraulic system.
液压控制阀是液压系统的核心控制元件之一，其性能好坏将直接影响执行元件的静、动态特性及系统的整体性能。 - As one of the most common actuating mechanisms in pneumatic system, pneumatic cylinder is widely applied in automatic production.
气缸作为气动系统中最常见的执行机构，广泛应用于自动化生产中。